Focusing Mount 4112
|
(#4112) Focusing Mount
The vertical working distance 54mm(+26, -28), the Rings ID. 83mm forXTS,XTL,XTD and XT microscope body, ID 25mm for pole, the centerline to centerline 120mm from ring to hole.
$46.00
|
|
Focusing Mount 4113 |
(#4113) Focusing Mount
The vertical working distance 80mm(+69, -11), focusing hand wheel is adjustable to loosen and tighten, the Ring;s ID. 83mm for XTS,XTL,XTD microscope body, ID 25mm for pole, the centerline to centerline 140mm from ring to hole.
$59.00
|
|
Focusing Mount for pole stand
|
(#4114) Focusing Mount for pole stand
The Rings ID.76mm only for XTG microscope body, ID.30mm for pole. the vertical working distance 88mm. Focusing hand wheel is adjustable to loosen and tighten. The distance from FM centerline to pole centerline is 167mm.
$46.00
|
|
Focusing Mount for pole stand |
(#4115) Focusing Mount for pole stand
The Rings ID.83mm only for XTS, XTL, XTD series microscope body, ID.30mm for pole. the vertical working distance 88mm. Focusing hand wheel is adjustable to loosen and tighten. The distance from FM centerline to pole centerline is 167mm.
$59.00
|
|
Focusing Mount for track stand |
(#4141)Focusing Track Mount for track stand
The Rings ID.76mm only for XTG microscope body. Focusing hand wheel is adjustable to loosen and tighten, only be used for Fan-style base and Track Stand
$46.00
|
|
Focusing Mount for track stand |
(#4142)Focusing Track Mount for track stand
The Ring's ID.83mm only for XTS, XTL, XTD series microscope body. Focusing hand wheel is adjustable to loosen and tighten, only be used for Fan-style base and Track Stand
$59.00
|
|
Focusing Track Mount with
Coarse and Fine focusing hand wheel |
(#4143) Focusing Track Mount with Coarse and Fine focusing hand wheel
The Rings ID.76mm only for XTG microscope body. It is only be used for Fan-style base and Track Stand. Coarse and Fine focusing hand wheel can focus in range for observation of precise image in high magnification.
$46.00
|
|
Focusing Track Mount with
Coarse and Fine focusing hand wheel |
(#4144) Focusing Track Mount with Coarse and Fine focusing hand wheel
The Ring's ID.83mm for XTS, XTL, XTD series microscope body. It is only be used for Fan-style base and Track Stand. Coarse and Fine focusing hand wheel can focus in range for observation of precise image in high magnification
$59.00
|
|
| Universal Arm/E-Arm |
|
Universal Arm |
(#4121) Universal Arm (E-Arm)
5/8inch fitting, the ID 83mm Ring for microscope body, centerline to centerline 6inch from the fitting to ring. Vertical working distance 54mm (+26, -28). Focusing hand wheel is adjustable to loosen and tighten.
$72.00
|
|
| Ring Adapter |
|
Ring Adapter |
(#4224) 76mm Ring Adapter
(#4225) 64mm Ring Adapter
These adapters allow you to use our microscope stand, or focusing mount with any of the 76 or 64mm series of stereomicroscope bodies. These substitution results in significant cost savings when compared to others, especially transmitted light stands.
(#4224) 76mm Ring Adapter
$12.00
(#4225) 64mm Ring Adapter
$12.00
|
| Control Optics USA
Address: 1445 W Brooks St., Ste H, Ontario, Ca 91762
For sales please contact:
Cindy Huang
Tel: 909.983.0788
Fax: 909.983.0791
Email: Cindy0586@yahoo.com
Control Optics USA
Address:1445 W Brooks St., Ste H, Ontario, Ca 91762
For sales please contact:
Dr. Norman (Waimin) Liu
Tel: 909.983.0788 Cell: 909.525.8666
Fax: 909.983.0791
Email: controloptics@yahoo.com
Control Optics HongKong
Products:Yamamoto Laser eye Protection,
Scratch-Dig comparator
Collimation Tester.
Services area: Hong Kong, Taiwan, South Asia
Contacts inf.
Mr. Ying Biu Lam
Cell: +852.930.10593
Email:YBLam2001@Yahoo.com
|
