Go-To Page    1      2      3      4      5      6      7      8      9     10     11     12  Price List        Back-Link ⇨

 It is essential to contain laser processors within an enclosed area from safety's point of view.  Although you isolate the work area from the outside, the operators at the same work place can not identify the condition of the operators within such enclosed area and this in not advisable from safety's perspective.  Not only isolation of laser control area but also offering peace of mind and safety to all of workers will constitute comfortable working environment.

YL-600 & YL-600C

  • Size:  Effective width is 33cm (thickness 0.7mm).

  • Material:  Plasticized polyvinyl chloride

  • Sales Unit:  Increments by 50cm up to the maximum length
    which is 10m per roll.

Outline of product

  • As this is made of plasticized polyvinyl chloride, you can easily cut CURTAIN by scissors and fit it to the size of any ready made facility.

  • Long length product is available and you can use it for a larger area.

  

Installation method of laser shield curtain:

Laser shield curtain is made of plasticized polyvinyl chloride.  Therefore, it is soft and flexible, and its installation can be made in any shape according to applications.  However, in order to maximize its effectiveness, your attention is drawn to the following.

  
Installation of Laser Curtain to a Transparent Panel

The surface of LASER CURTAIN is somewhat adhesive.  Firstly, place LASER CURTAIN to the panel, then push out air bubbles which may exist between CURTAIN and the panel.  Even if air bubbles remain, the effectiveness of CURTAIN does not decline.  After that, apply 3M multi-purpose adhesive to the upper & lower edges of both CURTAIN and the panel in approximately 1 cm width, and fasten.

 

  

Laser absorption type - YL-600, and
Application for Multi bands laser - YL-600C.

FILTER
TYPE		 FILTER CODE COLOR &
LUMINOUS TRANS-MITTANCE
(LT)		 APPLICABLE LASER WAVE-LENGTH (nm) MINIMUM
OPTICAL DENSITY
(OD)
COLOR LT


YL-600		 ARGON RED
 20% EXCIMER 190 ~ 380 3 <
ARGON 488
514.5
He-Cd 441.6
Nd-YAG (SHG) 532
He-Ne BLUE
 12% He-Ne 632.8 2 <
(Dye) 570 ~ 630
GOLD VAPOR 627.8
KRYPTON 647.1
676.4
RUBY 694.3
LASER DIODE GREEN
 12% LASER DIODE 740 ~ 910 3 <
ALEXANDRITE 740 ~ 820
TI-SAPPHIRE 700 ~ 1000 1 ~ 3
Nd-YAG GREEN
 30% Nd-YAG 1064 3 <
CO2 10600

 
YL-600C		 Nd-YAG 2 AMBER
 7% Nd-YAG (FHG) 266 3 <
Nd-YAG (THG) 355
Nd-YAG (SHG) 532
Nd-YAG 1064

Please note that optical density graphs are based on measurement values, not based on standard values.